Help
Search

ExpressPod troubleshooting

Buttons not responding or no responses coming in? Start here.

Checked against the app: , Yump 5.0.02 min read

Buttons not responding

Try these first.

  1. Restart the ExpressPod. See Reboot your ExpressPod.
  2. Check the batteries. Weak batteries often stop the buttons from working. See Change ExpressPod batteries.
  3. Clean the buttons. Dust, moisture or sticky residue can block a press. Clean the front as described in Clean your hardware.
Has the ExpressPod been cold or damp?

Cold or condensation can affect the buttons for a while. Move the ExpressPod somewhere dry and at room temperature. Then test it again.

No responses on the dashboard

If people press the buttons but nothing shows up, check the stream and the dashboard first. See Fix missing data.

ExpressPod 4G: weak mobile signal

Weak signal is a common cause. Basements and buildings with thick walls are typical problem spots.

  • Move the ExpressPod closer to a window or an outside wall.
  • Check the signal with a mobile phone at the same spot. If your phone barely has signal, the ExpressPod will struggle too.
  • Restart the ExpressPod. See Reboot your ExpressPod.

When to contact Yump support

Contact Yump support if:

  • The ExpressPod still does not respond after a restart and new batteries.
  • Only some buttons work.
  • The problem comes and goes over several days.
  • You have good mobile signal, but an ExpressPod 4G still sends no responses.
Did this help?