Help
Search

Change ExpressPod batteries

Swap the batteries in your ExpressPod

Last checked: 1 min read

When the batteries in your ExpressPod run low, swap them for new ones.

The steps below follow the old guide for the EP-02 ExpressPod. An ExpressPod Lite uses a CR2450 coin cell.

What you need

  • A small Phillips screwdriver or hex key.
  • New batteries of the same type as the old ones.
Warning

This exposes the inside of the device. Avoid static discharge. Do not touch the circuit boards.

Replace the batteries (EP-02)

  1. Turn the power switch to Off.
  2. Remove the question panel from the front.
  3. Separate the ExpressPod from its stand.
  4. Turn the unit upside down.
  5. Unscrew the screws on the battery cover.
  6. Slide out the battery holder.
  7. Replace the batteries. The negative end (flat) goes toward the spring.
  8. Slide the battery holder back in and screw the cover closed.
  9. Put the stand and the question panel back.
  10. Turn the power switch to On.
Did this help?